OVERALL OPERATING HEIGHT WITH FOUNDRY/EXCAVATING BUCKET SHORT LIP IN (MM) 161.4 (4100) OVERALL OPERATING HEIGHT WITH LOW PROFILE/STANDARD LIP BUCKET IN (MM) 165.6 (4207) | |
VISIBILITY AND PERFORMANCEThe Super Boom feature of our Compact Track Loaders provide more dump height and reach so operators can load material into the center of high-sided truck boxes or hoppers. The Super Boom vertical lift linkage also maximizes visibility by providing a clear view of the cutting edge, to the bucket at full height, and the sides and rear. | |
OUTSTANDING POWERThe power of the C362 CTL is maximized allowing for more material to be moved in a day. This loader features an extra-large frame and 114 HP; It is the biggest and most powerful compact track loader New Holland has ever produced. On top of that, the loader has a 6,200 lb rated operating capacity and enormous breakout force, letting operators move larger and heavier material. | |
VERSATILITYThe C362 CTL also offers versatility in a number of ways. The operator can personalize speed and sensitivity settings with adjustable electro-hydraulic controls. Another feature is Auto Ride Control which comes standard on EH models. Operators can also run the biggest attachments with an optional Enhanced High Flow of 41.6-gpm at 4,100 psi. | |
SUPERIOR PERFORMANCEThe tractor loader's rugged 3-point hitch allows for the best performance. Its adjustable sway control, controllable down pressure, and optional dual tilt cylinders give the best leveling performance and best-in-class scraping. |
ENVIRONMENTALLY FRIENDLYNew Holland 300 Series comply with Tier 4A & Tier 4B regulations, cutting emissions levels, with over 90% less particulate matter (PM) and 50% less nitrogen oxide (NOx) than the previous generation. In addition, when you don’t need the full power of the machine, the variable flow hydraulic pump only uses the power required leading to significant extra-fuel savings as well as reduced operating noise. |
EASY ACCESS, SIMPLIFIED SERVICEEasy access makes daily service and maintenance that much easier. Consequently, all daily service points are grouped together, and all major service points can be easily reached by flipping the cab forward. |
UNMATCHED ACCESSIf ever needed, the entire cab can be tilted forward for unrivaled access to components and easy cab cleanout. |
GET TO ITAccess engine oil, fuel fill, hydraulic oil, coolant and radiator points without tools, and clean the radiator from either side. Engine oil and filter changes are required every 500 hours, as are changes to the primary fuel filters and hydraulic oil filters. |
TOP SERVICECompact Track Loaders are supported by the New Holland Top Service program. Dedicated logistics and resourcing teams work hand-in-hand with your New Holland dealer to get you expedited parts and service solutions. See your New Holland dealer for more details. Some exclusions or limitations may apply. |
Overall operating height with foundry/excavating bucket short lip in (mm) |
161.4 (4100) |
Overall operating height with low profile/standard lip bucket in (mm) |
165.6 (4207) |
Overall operating height with low profile extended/long lip bucket in (mm) |
170.4 (4329) |
Bucket hinge pin in (mm) |
131.6 (3342) |
Top of ROPS in (mm) |
80.4 (2043) |
Bottom of level bucket, fully raised in (mm) |
123.2 (3129) |
Overall length without attachment with coupler in (mm) |
120.2 (3054) |
Overall length with foundry excavation bucket on ground in (mm) |
144.6 (3673) |
Overall length with low profile bucket in (mm) |
148.8 (3781) |
Overall length with low profile extended bucket in (mm) |
153.7 (3904) |
Dump angle degrees |
45.3 |
Dump height with foundry/excavating bucket short lip in (mm) |
104.1 (2645) @ 45° |
Dump height with low profile/standard lip bucket in (mm) |
101.1 (2568) @ 45° |
Dump reach (max height) in (mm) |
31.6 (802) @ 45° |
Bucket on ground degrees |
32 |
Bucket at full height degrees |
83.1 |
Track on ground in (mm) |
64.5 (1639) |
Ground clearance (bottom of belly pan) in (mm) |
9.6 (244) |
Angle of departure degrees |
32 |
Clearance circle without bucket in (mm) |
57.7 (1465) |
Clearance circle with foundry bucket in carry position in (mm) |
88 (2234) with 78" bucket |
Clearance circle with low profile bucket on ground in (mm) |
91.8 (2331) with 78" bucket |
Clearance circle with extended low profile on ground in (mm) |
96.2 (2444) with 78" bucket |
Clearance circle rear in (mm) |
67.9 (1725) |
Track guage in (mm) |
58.6 (1488) |
Overall width in (mm) |
76.5 (1943) |
Manufacturer/model |
FPT / F5BFL413E*B002* |
Type |
Diesel 4-stroke, turbo, D.I. |
Cylinder |
4 |
Bore/stroke in (mm) |
3.9 x 4.3 (99 x 110) |
Displacement in3 (L) |
207 (3.4) |
Fuel injection |
HPCR Direct |
Fuel |
#2 diesel |
Fuel filter |
Pre-filter 99.8% @ 30 microns, Main filter 95% @ 4 microns |
Air intake |
Turbocharged Aftercooled with external EGR and SCR |
Cooling |
Liquid |
High idle - no load rpm |
2500 +/- 25 |
Rated - full load rpm |
2500 |
Low idle rpm |
1150 +/- 25 |
Operating weight lbs (kg) |
10,610 (4823) |
Shipping weight lbs (kg) |
10,267 (4657) |