Meyer Manufacturing Meyer Feederbox
|
Many Meyer Forage Boxes are available in a Feederbox Version. Typically these units are used to make feed deliveries and in some cases act as feed mixers if product is layered while loading. They are available in front unload, rear unload or front & rear unload version in lengths from 14 - 26' in length. Often they are equipped with shorter sides for easier loading and have different drive options to accomodate this feeding application. Clad-Tuff Fiberglass Sides come standard on a feederbox along with Solid Poly Floors and Conveyor Liners to avoid the corrosion associated with cured silage and for less stress for big loads and frozen material. Meyer offers the most extensive line of Feederboxes on the market, we have a size and style to fit your livestock operation! |
|
Additional Information You can view additional information about each individual model by viewing the Forage Box Section of the website for the model in question! |
|
RT500 & RT600 Front Unload Feederbox
RT500 available in 14 - 18' versions  |
|
RT200 Front/Rear Unload Feederbox
RT200 available in 16 - 22' versions
 |
|
RTX600 Front Unload Feederbox
RTX600 available in 20 - 24' versions
 |
|
RTX200 Front/Rear Unload Feederbox
RTX200 available in 20 - 24' versions
 |
|
8200RT Front/Rear Unload Feederbox
8200RT BOSS available in 22 - 26' versions (8' inside width!)
 |
|
RT100 Rear Unload Tender Box / Feederbox
RT100 available in 16 - 22' versions
 |
|
8100RT BOSS Rear Unload Tender Box / Feederbox (8' inside width!)
8100RT BOSS model is available in 18 - 26' versions
|
|
LH or RH Discharge available All front & front/rear unload feederboxes come standard as LH discharge but are also available in RH as well (Except 8200 which is LH only). RH pictured here.
|
|
36" Fold Down Conveyor Extension This handy fold-down extension package extends down 36" from the side of the feederbox side. Designed to run flat or at mild angles to fill bunks and maintain reasonable distance from feed mangers. Manual lift with shock assist standard, hydraulic lift optional.
|
|
PTO / Basic Hydraulic or Cab Control Drive Available PTO Drive is standard on RT & RTX front unload and front/rear unload models.
|
|
Simple Direct Drive / RT & RTX standard drive This simple direct drive system allow for simple on / off operation and minimal maintenance. Conveyor/augers have soft start followed by apron with second lever. Various sprockets available to tune the desired discharge rate.
|
|
Basic Hydraulic Drive Optional package on RT & RTX models. This package replaces the PTO powershaft with a hydraulic motor and hoses. This eliminates hooking/unhooking of the PTO between loads for added convenience. Controls on the Feederbox remain the same as a Direct PTO drive unit. |
|
Hydraulic In-Cab Control System This Optional Hydraulic In-Cab Control System is available for RT & RTX Feederboxes. It allows for full operation of all functions from the seat of the tractor or truck. It includes provisions to lift / lower the cross conveyor extension (if equipped). Requires 25 gpm flow. This package is popular on truck mounts and trailer mount models.
|
|
8200RT BOSS Cab Control Drive This All-Hydraulic Cab Control Drive is top of the line. It is standard equipment on the 8200RT BOSS Feederbox and designed for large capacity applications. |
|
Scale Packages Scale Packages are available for all models. Wagon mount 4 cell systems, trailer mount 5-6-8 cell systems and truck mount 6-8 cell systems are available. |
|
Clad Tuff fiberglass Side Panels / Solid Poly Floor All Meyer Feederboxes have Clad Tuff Fiberglass reinforced side panels and solid poly floor to resist corrosion and ease the strain on the box from heavy loads and cold weather! |
|
Cross Conveyor Poly Liner / Conveyor Chain Hold-downs All Meyer Feederboxes with a front unload feature have poly lined cross conveyors and hold-down rails to eliminate buildup under the cross apron chain! |
|
15" Taller Side Option on RT Models - Includes 3rd Auger This 15" taller side package is optional on RT model feederboxes, it includes a 3rd auger. The standard for a RT model is 4' sidewalls and 2 augers.
|
|
7' Side Package with 4th Beater - Optional RTX A 7' side package with 4th beater is available for the RTX models. (standard RTX models have 6' sides & 3 augers). |
|
Deluxe Weigh Bar Mount Engineered mounting system to adapt to all scale systems. (tandem wagon rear mount pictured) |
|
Bumper Boards All Meyer RT & RTX model feederboxes come standard with lower 2x6 bumper boards to help avoid "dings" from the loader! |
|
2x6 Top Rail Option This 2x6 top rail package adds capacity and offers protection on RT / RTX models. |
|
14" Side Extension Package w/4th Beater for 8200RT The 8200RT BOSS model is 8' wide inside. The standard interior height is 6' but offers a 14" side extension package (screen or solid) with a 4th beater. |
RTRTXFEEDERBOX.pdf
Turn Key Web Solutions - Privacy Policy - All Items - Dealer Performance Login