Kuhn Advance 300 .1

Accurate Spreading, Wide Working Widths

Wide Working Widths

Electronic Mass Flow Control (EMC) System

Electronic Mass Flow Control (EMC) is a unique technology, well-established and proven after years of experience. This pioneering, torque-based system measures and continuously adjusts the application rate on each disc separately for complete flexibility and high precision. EMC technology maintains the difference between the set rate and actual as applied rate to 2% or lower.

Border Spreading

Border spreading is accomplished on the Advance™ fertilizer spreader by reducing disc speed and/or drop point so fertilizer stays within the boundaries of your fields. Border spreading can be engaged on either the left- or right-hand side via the ISOBUS control terminal, creating a more trapezoidal spread pattern on the selected side.

Coaxial Distribution Adjustment (CDA) System

The Coaxial Distribution Adjustment (CDA) system has two important features that make it unique:

1- The pivoting hopper base enables quick adaptation to various fertilizers and working widths by adjusting the drop point of the fertilizer onto the spreading discs.
2- Specially designed metering outlets close to the center of the discs allow multiple supply points to the paddles. This helps ensure constant fertilizer flow and an even spread pattern.

Vari-Spread and Opti-Point

The Vari-Spread Pro section control system saves fertilizer by shutting off sections in point rows and oddly shaped fields to decrease overlap and reduce input costs. In  manual mode, four sections per side are selectable (eight total). In automatic GPS mode, the system adjusts the drop point and disc speed constantly, resulting in a continuously variable spread width. Opti-Point takes the guesswork out of headland turns, starting or stopping the discs at just the right moment to reduce overlap.

Axis® PowerPack

The Axis® PowerPack is the hydraulically driven module for high-precision spreading of granulated fertilizer. Based off the well-proven Axis H-EMC model design, the fertilizer system allows granulated fertilizer and seeds to be spread with ultimate precision from 60’ to 164’ depending on material.

Universal PowerPack

The Universal PowerPack allows for accurate spreading of ag lime as well some organic material. The Universal PowerPack contains larger and heavier spinning discs to spread the heavy and wet material up to 60’. The Universal PowerPack can be used for variable rate application as standard.

Adjustable Axle

All Advance .1 models feature adjustable axle spacing from 80” - 90” - 120” as standard equipment. Combined with the high ground clearance and available tire options, operators can set the machine for in-season nutrient application in both 20” and 30” rows.

Premium Features In Every Machine

Main Hopper

Belt-Over-Chain Conveyor

A belt-over-chain conveyor moves the product from the main hopper to the PowerPack in the rear. This durable design provides a positive drive to eliminate slippage in heavy lime conditions. The conveyor runs “uphill” toward the rear-mounted PowerPack, which improves balance and tongue weight by keeping the majority of the load toward the front of the machine.

Weighing System

Four weigh cells located between the hopper and frame to inform the operator of the quantity  remaining in the hopper. This helps the operator anticipate the appropriate reloading points and avoid running out of product mid-pass. The weighing system also aids in regulatory documentation and record keeping.