BaumaLight MS960
MS960 Heavy Duty Fixed Tooth Mulcher for Skidsteer
The MS960 Baumalight brush mulcher is a 60” heavy duty bush mulcher with a 75” Path width and it has turned into a very popular model for mulching with average to large skidsteers.
The 900 Series teeth are available in either Double Carbide Tipped Ripper or Single Blade Planer style. The carbide Ripper tooth is the good general use tooth for mulching with lots of ground contact, if there are not many stones then the Planer tooth is a little bit more efficient.
The 900 series skidsteer mulchers also come with a larger pressure gauge which is very handy to watch and see how close you are to maximum pressure; once you start blowing over relief the mulcher becomes very unproductive so you do want to keep an eye on the pressure.
Operating a Brush Mulcher from a skid steer is probably the most comfortable way for vegetation management as your work is directly in front of you and new skidsteers are very operator comfort focused.
See our brush cutting size chart to see what limb size this heavy duty skidsteer mounted forestry mulcher can handle.
SOLD BY EQUIPMENT DEALERS
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership |
|
Save time by easily replacing the AR400 steel wear plates on the MS960 without needing to remove the rotor. |
|
When push comes to shove, the integrated push bar helps control |
Directional felling hook
Built into the pusher bar, the directional felling hook will directionally control wayward trees, sprawling clumps and low hanging limbs. |
|
The MS960’s frame is angled so that you can roll back the Brushy Mulcher, pulling back the pusher bar so that you can fully engage the mulching head. This allows the operator to use the mulching head to fell standing trees. |
|
Take full advantage of the forward curl and roll back of the MS960 without risking expensive damage to the hoses. Unique to the Baumalight Brush Mulcher, the spring loaded hose support prevents the hoses from falling into harm’s way during forward curl. |
|
The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt. |
|
To maximize the rotor speed and torque to account for changing mulching material, the MS960 is available with a variable two-speed motor option. |
|
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. |
|
The improved design of the MS960 mulcher head now allows the operator better visibility to the area you are mulching. |
|
All MS960 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment. |
|
To improve the weight management of the Brush Mulcher, the MS960 is now designed with the rotor closer to the carrier. This unique design feature allows for smaller carriers to be able to manage a larger mulcher. |
|
If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in. |
|
Now completely redesigned for the 900 series Brush Mulcher, the heavy duty steel frame is constructed with T1 alloy tool steel sheet metal. |
| Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program. |
|
New unit at factory with a custom color on a sold unit |
 Unit on display at a local dealer |
Videos
Turn Key Web Solutions - Privacy Policy - All Items - Dealer Performance Login